Single hung
Double hung
Horizontal roller
Casement
Bay & bow
Sliding glass doors
Entry doors
Impact garage doors
PGT
CGIFree in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Get your free estimateFast, Reliable Door Installation Across Alamo
Door installation in Alamo usually runs between $900 and $4,800 per opening depending on whether you’re replacing a standard slab or ordering a custom-milled entry system for a stone and stucco estate. Most replacement doors in Alamo’s housing stock require more than a drop-in swap because the original jambs, casings, and sightlines were built custom in the 1970s through 1990s. Our Door Installation team knows those homes. We’ve retrofitted warped aluminum frames on Stone Valley Road, matched oak casing profiles on Las Trampas Ridge, and coordinated with Alamo’s design review enough times to tell you before you order whether a door will clear inspection. Call (831) 480-4124 and we’ll give you a written price before any work starts.
Why Lightwell Windows San Francisco Is Alamo’s Preferred Door Installation Company
Alamo homeowners don’t call us for commodity work. They call because the door on a 4,200-square-foot custom home off Danville Boulevard has to look like it was always there, and because a failed seal on a west-facing French door is a visible problem every single afternoon. Keith Yamada runs our crew with a simple rule: every opening gets measured twice, priced once, and written down before a single hinge is ordered. That’s the Cedarwell Care Promise, and it’s been how we operate since 2010.
Our technicians are background-checked and uniformed. They arrive with shoe covers and drop cloths, ask before moving anything near the door, and quiet the tools during nap windows if there’s a baby in the house. When the job is done, we photograph the cleanup and send it to you. If something isn’t right within 365 days, the Done Right Promise means we come back and fix it. No debate, no countdown.
Alamo is a small town. Word travels. We’d rather earn the next referral than rush the current job.
Styles & brands we work with
Exterior Door Installation in Alamo
Exterior Door Installation in Alamo typically runs $1,200 to $4,800 per opening, and the range is wide because Alamo’s custom estates rarely accept an off-the-shelf slab. The existing jamb on a 1980s Mediterranean home may be out of square by 3/8 inch. The casing profile may be a discontinued millwork pattern. The door itself may have been sized to match a covered entry that a previous owner extended. All of that has to be measured, documented, and priced before anything is ordered.
Design Review and Millwork Matching
Alamo’s design review enforces strict single-family zoning and architectural compatibility. Replacing an entry door on a custom 1970s to 1990s estate often requires historical sympathetic millwork and finish matching that no one demands in unincorporated Danville or Walnut Creek. We custom-mill casing to match the original jamb profile, match stain on-site, and document the work for the permit file.
Western Sun Exposure
Doors facing west on Alamo’s hillsides take direct summer sun from about 2 p.m. until sunset, with surface temperatures that can exceed 140°F. Cheap insulated glass units crack and fog within a few seasons if the solar heat gain coefficient was never matched to the lot orientation. We spec low-E dual-pane glass rated for that exposure and warn you in writing before ordering anything less.
French Door Installation in Alamo
French Door Installation in Alamo typically runs $1,800 to $4,200 for a pair, with the cost driven less by the doors themselves and more by the condition of the rough opening and the hardware spec. Alamo homes built from the 1970s onward feature extensive glazing and multi-slide patio doors, and many of the original French door frames are now 30 to 50 years old. A warped threshold or settled jamb means the new pair has to be installed with shims, new flashing, and often a custom sill pan.
Keeping the Original Sightlines
On Stone Valley Road, our crew replaced a warped 1980s aluminum-frame front door on a ranch-style home. We retrofitted the opening with a Therma-Tru fiberglass door, custom-milled oak casing to match the original jamb, and a dual-pane low-E glass panel that preserved the narrow sightlines the homeowners loved. That job took five days of millwork plus one day of install, and the written price held exactly.
Heat and Buckling
Alamo’s 100°F heat spells are hard on French doors, especially those with wide stiles and dark finishes. We check the reveal gaps, adjust the hinges and multipoint hardware, and ensure the door can expand through a full thermal cycle without binding. That’s not an option. It’s what keeps a $3,000 pair of doors closing cleanly in August.
Trusted Brands We Service in Alamo
We carry and install Therma-Tru entry systems, ViewLux aluminum doors, and PGT impact-rated products among the eight manufacturer lines Lightwell represents. That means when an Alamo homeowner needs a specific hinge, threshold, or weatherstripping that matches an existing door, we’re not special-ordering into a void. We stock local parts for the brands most common in the Danville Boulevard corridor and can turn around service calls faster because the inventory is already here.
Common Door Installation Problems We See in Alamo Homes
- Design review rejections on off-the-shelf doors. Proportions and stile details that clash with existing custom millwork stall permit approval, and the homeowner loses weeks correcting an order they were never told would be a problem.
- Sun-blasted glass failure on western exposures. The manufacturer’s SHGC wasn’t matched to the lot orientation, so a brand-new insulated unit fogs or cracks within two or three seasons. We see this most often on Las Trampas Ridge and along the western slope of Stone Valley Road.
- Out-of-square rough openings. A builder ordered a slab door without checking the existing jamb, then discovered the opening was 3/8 inch out and the custom casing had to be remilled from scratch. Measuring first would have prevented a two-week delay.
- Settled thresholds on 1970s ranch homes. Original aluminum-frame doors on the area’s ranch-style houses often sit in jambs that have moved over four decades, causing the new door to drag or the weatherstripping to leave a visible gap.
See the difference
Before
After
Before
After
Before
AfterPricing for Door Installation in Alamo, CA
A standard slab replacement in Alamo runs about $900 to $1,500 installed. A prehung single entry door with new casing and weatherproofing lands between $1,800 and $3,200. French door pairs start around $1,800 and climb to $4,200 or more when you’re matching custom millwork or adding impact-rated glazing. For high-end custom entry systems on gated estates, budget $4,800 to $8,500 depending on hardware, glass, and finish work. The written price includes labor, materials, and the permit-ready documentation Alamo’s design review expects. Call (831) 480-4124 for a free estimate with a fixed number on paper.
We Also Serve Cities Near Alamo
Our crews work throughout the San Francisco Bay Area, including Door Installation in Alamo and nearby Walnut Creek, Lafayette, Danville, and Castro Valley. Scheduling is coordinated from our Bay Area office, and the same written-price rule applies everywhere we go.
Serving Alamo, CA - Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Installation in Alamo
Yes, in most cases Alamo’s design review will require the replacement door to be architecturally compatible with the existing home, which for many 1980s estates means matching the original millwork profile, stile width, and finish tone. We document the existing jamb and casing before you order, then mill or match the profiles so the permit application has what it needs on the first submittal. Call (831) 480-4124 if you want us to check your opening before you spend anything.
The door needs adequate reveal gaps, properly torqued hinges, and glass with a solar heat gain coefficient matched to the lot orientation. On west-facing Alamo hillsides we typically recommend low-E dual-pane glazing and weatherstripping that can handle repeated thermal cycling without compressing permanently. Our install includes those adjustments and a written spec sheet so you know exactly what was installed.
In many Alamo homes the answer is yes, using impact-rated glass from PGT or a comparable line that’s cut to the existing frame dimensions while keeping the narrow stiles and rails intact. We measure the frame depth and sightline clearance before quoting, and if the frame can’t accept the thicker glass without compromising the look, we’ll tell you that before you order. Estimates are free at (831) 480-4124.
Lead times on material drive the schedule, not install labor. A custom-milled fiberglass or wood entry door can take 8 to 12 weeks from order to delivery, while the physical installation is usually one to two days once the door is on hand. We place the order only after you’ve signed off on the written price and the millwork profile has been confirmed against the existing opening.
No, Alamo homeowners do not need Miami-Dade NOA or Florida Product Approval for doors. Those certifications apply to hurricane zones in the Southeastern U.S. What Alamo does require is compliance with California building codes and the town’s design review standards, which is what we prepare for every permit submittal. Call (831) 480-4124 and we’ll walk you through what your specific property actually requires.
Get Your Free Alamo Door Installation Estimate
Every Alamo job starts with a measurement, a written price, and a conversation about what will and won’t pass design review. There’s no charge for the estimate and no pressure to sign. Call (831) 480-4124 or reach out through our contact page and a live person will answer. Keith Yamada keeps the schedule and the promises, and you’ll have a fixed number in writing before anything is ordered.
Written by Keith Yamada, Owner at Lightwell Windows San Francisco, serving Alamo, CA.
Six Reasons Homeowners Choose Lightwell Windows San Francisco
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.